24/7, every day · Dubai+971 50 623 0452
SAYARAAuto Services
Diagnostic scanner plugged into a car's OBD port

Kia 300E · Clutch Replacement

Kia 300E Clutch Replacement in Dubai

Slipping or juddering clutches replaced as a complete kit, not piecemeal. Quoted for your 300E, 2017-2026.

  • 2017-2026
  • SEDAN
  • Workshop job
  • 1-2 days
Call NowWhatsApp UsBook Now
Typical time
1-2 days
Where
In our workshop
Hours
24/7

We do a clutch replacement on the Kia 300E regularly, and this page is what the job involves on this car specifically rather than on cars in general.

Clutch Replacement on a Kia 300E

A clutch that slips under load, judders on take-up or bites right at the top of the pedal is at the end of its life, and because the gearbox has to come out to reach it, the sensible job is the complete kit — friction plate, pressure plate and release bearing — plus the rear main seal if it is weeping. Doing less means paying the labour twice.. On a Kia 300E (2017-2026) the parts and the labour time are specific to the model — it is a sedan, which changes both, so we confirm the year before quoting rather than after.

Dual-mass flywheels change the arithmetic

Many modern cars use a dual-mass flywheel that has its own springs and its own wear. Fitting a new clutch to a worn dual-mass gives you a car that judders on a new clutch, and the only fix is doing the job again. We check it while the box is out and tell you the cost before reassembly, not after.

What else we look at on a 300E

Sportage and Seltos gearboxes want their fluid changed on the shorter interval here; the schedule assumes a cooler climate than this one. We check that alongside a clutch replacement, plus a battery load test, because the car is already with us and finding a second fault later costs you a second visit.

What it costs on a Kia 300E

Clutch Replacement on a 300E is quoted after inspection, because pricing this job from a description is guessing and you would be paying for the guess. Either way you get the number before any work starts, it includes VAT, and it does not move afterwards. Typical time on this job is 1-2 days, in our workshop.

What the visit covers

  • Complete clutch kit: friction plate, pressure plate, release bearing
  • Flywheel inspection, machining or replacement where dual-mass
  • Rear main seal and spigot bearing while access is open
  • Hydraulic master and slave cylinder check, bleed and pedal adjustment
Technician working through a vehicle inspection checklist

Other services for a Kia 300E

Same technicians, same car. Pick what you need.

Clutch Replacement for other Kia models

Kia 300E battery replacement

Questions we get asked

How do I know my clutch is going?

Engine revs rising without matching acceleration in the higher gears, a burning smell after hill starts, judder as you pull away, or the biting point creeping upward toward the top of the pedal travel.

How long does a clutch replacement take?

Most cars are one to two days. Front-wheel-drive cars where the subframe has to come down sit at the longer end.

Should I replace the flywheel too?

If it is a dual-mass unit and it has play or noise, yes. A single-mass flywheel can usually be machined. We show you the measurement rather than asking you to take it on trust.

Book a clutch replacement for your Kia 300E

Call, or send your location on WhatsApp. We will tell you the price before we set off.