24/7, every day · Dubai+971 50 623 0452
SAYARAAuto Services
Technician working on a car engine during a service

Nissan 350Z · Clutch Replacement

Nissan 350Z Clutch Replacement in Dubai

Slipping or juddering clutches replaced as a complete kit, not piecemeal. Quoted for your 350Z, 2002-2009.

  • 2002-2009
  • COUPE
  • Workshop job
  • 1-2 days
Call NowWhatsApp UsBook Now
Typical time
1-2 days
Where
In our workshop
Hours
24/7

We do a clutch replacement on the Nissan 350Z regularly, and this page is what the job involves on this car specifically rather than on cars in general.

Clutch Replacement on a Nissan 350Z

A clutch that slips under load, judders on take-up or bites right at the top of the pedal is at the end of its life, and because the gearbox has to come out to reach it, the sensible job is the complete kit — friction plate, pressure plate and release bearing — plus the rear main seal if it is weeping. Doing less means paying the labour twice.. On a Nissan 350Z (2002-2009) the parts and the labour time are specific to the model — it is a coupe, which changes both, so we confirm the year before quoting rather than after.

It might not be the clutch at all

A pedal that goes to the floor, or a clutch that will not disengage, is often a hydraulic failure — a leaking slave cylinder or air in the line — and that is a fraction of the cost. We check the hydraulics before quoting the gearbox out.

What else we look at on a 350Z

CVT gearboxes in the Altima and X-Trail need their fluid changed far earlier than the schedule suggests once they have spent a few summers in Dubai traffic. We check that alongside a clutch replacement, plus a battery load test, because the car is already with us and finding a second fault later costs you a second visit.

What it costs on a Nissan 350Z

Clutch Replacement on a 350Z is quoted after inspection, because pricing this job from a description is guessing and you would be paying for the guess. Either way you get the number before any work starts, it includes VAT, and it does not move afterwards. Typical time on this job is 1-2 days, in our workshop.

What the visit covers

  • Complete clutch kit: friction plate, pressure plate, release bearing
  • Flywheel inspection, machining or replacement where dual-mass
  • Rear main seal and spigot bearing while access is open
  • Hydraulic master and slave cylinder check, bleed and pedal adjustment
Car mechanic in a workshop, tools in hand

Other services for a Nissan 350Z

Same technicians, same car. Pick what you need.

Clutch Replacement for other Nissan models

Nissan 350Z battery replacement

Questions we get asked

How do I know my clutch is going?

Engine revs rising without matching acceleration in the higher gears, a burning smell after hill starts, judder as you pull away, or the biting point creeping upward toward the top of the pedal travel.

How long does a clutch replacement take?

Most cars are one to two days. Front-wheel-drive cars where the subframe has to come down sit at the longer end.

Should I replace the flywheel too?

If it is a dual-mass unit and it has play or noise, yes. A single-mass flywheel can usually be machined. We show you the measurement rather than asking you to take it on trust.

Book a clutch replacement for your Nissan 350Z

Call, or send your location on WhatsApp. We will tell you the price before we set off.