24/7, every day · Dubai+971 50 623 0452
SAYARAAuto Services
Car mechanic in a workshop, tools in hand

Mitsubishi · Clutch Replacement

Mitsubishi Clutch Replacement in Dubai

Slipping or juddering clutches replaced as a complete kit, not piecemeal. Priced per Mitsubishi model, not per brand.

  • 122 Mitsubishi models
  • Workshop job
  • 1-2 days
  • Fixed quote after inspection
Typical time
1-2 days
Where
In our workshop
Hours
24/7

What follows is what clutch replacement on a Mitsubishi specifically involves, what it costs, and what we check while the car is with us.

Clutch Replacement on a Mitsubishi: what is different

Mitsubishi is a Japanese make, and high-mileage Pajeros and L200s in the UAE are usually working vehicles, and the alternator wears alongside the battery — testing both together avoids the second call-out. For a clutch replacement specifically that means we price the parts to the model rather than the badge, and we check the items that go alongside it on this range instead of quoting a flat figure and finding out later.

Which Mitsubishi do you have?

The vehicle database lists 122 Mitsubishi models, and parts, labour time and price all move between them. Pick yours from the list below for the detail that applies to your car rather than to the range.

While the Mitsubishi is with us

Every visit includes a battery health test — not a voltage reading, a load test — because a Mitsubishi in Dubai is on a two-to-three year battery cycle and the cheapest time to find a failing one is while somebody is already looking at the car. We also check charging voltage, because a battery that keeps going flat is usually an alternator story.

Dubai traffic is what wears clutches out

Clutch wear happens almost entirely during engagement, and stop-start crawling on Sheikh Zayed Road is thousands of engagements per week. A clutch that would last 150,000 km on open roads can be finished at 70,000 km on a commute made mostly of traffic.

What the visit covers

  • Complete clutch kit: friction plate, pressure plate, release bearing
  • Flywheel inspection, machining or replacement where dual-mass
  • Rear main seal and spigot bearing while access is open
  • Hydraulic master and slave cylinder check, bleed and pedal adjustment
Diagnostic scanner plugged into a car's OBD port

Clutch Replacement by Mitsubishi model

Pick your model for the price and the labour time that apply to your car.

Clutch Replacement for other makes

Other services for a Mitsubishi

Questions we get asked

How do I know my clutch is going?

Engine revs rising without matching acceleration in the higher gears, a burning smell after hill starts, judder as you pull away, or the biting point creeping upward toward the top of the pedal travel.

How long does a clutch replacement take?

Most cars are one to two days. Front-wheel-drive cars where the subframe has to come down sit at the longer end.

Should I replace the flywheel too?

If it is a dual-mass unit and it has play or noise, yes. A single-mass flywheel can usually be machined. We show you the measurement rather than asking you to take it on trust.

Mitsubishi needs a clutch replacement? Tell us the model.

Call, or send your location on WhatsApp. We will tell you the price before we set off.